Hp ProCurve 520wl Wireless Access Point Bedienungsanleitung PDF herunterladen (Seite 125)

Configuration Settings

7-3

Status disable (2) > set dhcpippooltbl <index> status <enable, disable, delete>

network parameters - link intergrity

network parameters - link intergritynetwork parameters - link intergrity

network parameters - link intergrity > show linkint

Link Integrity Status disable (2) > set linkintstatus <enable, disable>

Poll Interval 500 (sec) > set linkintpollint <Time in Seconds>

Poll Retransmissions 5 > set linkintpollretx <Number of Times to Retransmit>

network parameters - link intergrity - target ip address table

network parameters - link intergrity - target ip address tablenetwork parameters - link intergrity - target ip address table

network parameters - link intergrity - target ip address table > show linkinttbl

Target IP Address 0.0.0.0 > set linkinttbl <index> addr

Comment (optional) > set linkinttbl <index> cmt <Optional Comment>

Status disable (2) > set linkinttbl <index> status <enable, disable>

network parameters - vlan

network parameters - vlannetwork parameters - vlan

network parameters - vlan > show vlan

Status disable > set vlanstatus <enable, disable>

Management ID > set vlanmgmtid <VLAN ID for WL520 device 1 - 4094; 0=disabled>

network parameters - vlan id table

network parameters - vlan id tablenetwork parameters - vlan id table

network parameters - vlan id table > show vlanidtbl

VLAN ID (wireless interfaces) > set <index> id <VLAN ID 1 - 4094; 0=disabled>

interfaces parameters - wireless slot a with 5 ghz (802.11a) card

interfaces parameters - wireless slot a with 5 ghz (802.11a) cardinterfaces parameters - wireless slot a with 5 ghz (802.11a) card

interfaces parameters - wireless slot a with 5 ghz (802.11a) card > show wif

Physical Layer Type OFDM > show wif

Network Name My Wireless Network A > set wif 3 netname “Network Name for PC Card in Slot A”

Auto Channel Select enable >set wif 3 autoselect <enable, disable> (Not configurable in Europe)

Frequency Channel US/CAN: 52 - 5260 MHz

Japan: 34 - 5170

ETSI: varies

MHz > show wif

> set wif 3 channel <for FCC and ETSI regulatory domains: 36, 40, 44, 48, 52, 56, 60, 64 - in Japan: 34, 38,

42, 46 - in Turbo mode (not available in all countries): 42, 50, 58>

NOTE:

RTS/CTS Medium Reservation 2347 (off) > set wif 3 medres <0 - 2347 (2347=off)>

DTIM Period 1 (sec)

> set wif 3 dtimperiod <1 - 65355>

Transmit Rate 0 - Auto Fallback (Mbits/s) > show wif

> set wif 3 txrate <0 (auto), 12, 18, 24, 36, 48, 72, 96, 108 or 0, 24, 36, 48, 72, 96, 144, 192, 216 in

Turbo>

(Reported in 500 Kb/sec increments so each value is twice the Mb/sec number)

Turbo Mode disabled > set turbo <enable, disable>

interfaces parameters - wireless slot a with 2.4 ghz (802.11b) card

interfaces parameters - wireless slot a with 2.4 ghz (802.11b) cardinterfaces parameters - wireless slot a with 2.4 ghz (802.11b) card

interfaces parameters - wireless slot a with 2.4 ghz (802.11b) card > show wif

Physical Layer Type DSSS > show wif

Network Name My Wireless Network A > set wif 3 netname “Network Name for PC Card in Slot A”

Table 7-1

Table 7-1Table 7-1

Table 7-1 Configurable Parameters (Continued)

Configurable Parameters (Continued) Configurable Parameters (Continued)

Configurable Parameters (Continued)

configurable parameter

configurable parameterconfigurable parameter

configurable parameter factory default values

factory default valuesfactory default values

factory default values my system values

my system valuesmy system values

my system values cli parameter syntax

cli parameter syntaxcli parameter syntax

cli parameter syntax

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 141 142

Kommentare zu diesen Handbüchern

Keine Kommentare

Hp ProCurve 520wl Wireless Access Point Bedienungsanleitung Seite 125

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Router Hp ProCurve 520wl Wireless Access Point