Hp 6200 Bedienungsanleitung PDF herunterladen (Seite 143)

Removing a Bezel Blank

On some models, there is a bezel blank covering the internal drive bay that needs to be removed

before installing a drive. To remove a bezel blank:

1. Remove the access panel and front bezel.

2. To remove the bezel blank, push the two retaining tabs that hold the bezel blank in place

towards the outer left edge of the bezel (1) and pull the bezel blank inwards to remove it (2).

Figure 5-5 Removing a Bezel Blank

Replacing the Front Bezel

Insert the three hooks on the bottom side of the bezel into the rectangular holes on the chassis (1)

then rotate the top side of the bezel onto the chassis (2) and snap it into place.

Figure 5-6 Replacing the Front Bezel

ENWW Removing a Bezel Blank 135

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 180 181

Keine Kommentare

Hp 6200 Bedienungsanleitung Seite 143