
Converting to desktop configuration
This workstation can be operated in the mini-tower or the desktop configuration. Follow these steps to
convert to desktop configuration operation:
1. Disconnect power from the workstation (see
Predisassembly procedures on page 62).
2. Remove the side access panel (see
Removing the side access panel on page 65).
3. Remove the front bezel from the workstation (see
Removing the front bezel on page 68).
4. Press gently on the edges of the optical drive bay filler panel (1) to remove it from the front bezel
as shown in the following figure.
Figure 5-45 Removing the ODD bay filler panel
5. Rotate the filler panel (2) 90 degrees to a horizontal position.
ENWW
Removing and installing components
105
Kommentare zu diesen Handbüchern