Supports unbuffered non-ECC DDR3 SDRAM
The Intel Q65 Express chipset supports unbuffered non-ECC DDR3 SDRAM (synchronous
dynamic random access memory) at a frequency of up to 1333MHz.
NOTE: 1066MHz system memory frequency of operation requires at least PC3-8500 (DDR3-1066)
memory type for all populated memory modules, and an Intel processor with FSB (front side bus) of at
least 1066MHz.
System Memory upgrades are accomplished by adding DDR3 SDRAM module(s) to empty
DIMM slots on the System Board.
CAUTION: Voltage is supplied to the memory modules whenever the computer is connected to an
active AC outlet. Adding or removing memory modules while voltage is present may cause irreparable
damage to the memory modules or system board. The computer must be shut down with the AC power
removed (disconnect AC power cord at rear chassis or at AC outlet) prior to adding or removing
SDRAM modules.
HP recommends dual-channel symmetric configurations for the best memory performance.
For dual-channel symmetric performance, the total amount of memory in each channel must
be equal. Do not inter-mix memory module speeds or memory operating frequency will
default to lowest speed.
Kommentare zu diesen Handbüchern