HP SG3-300 Spezifikationen PDF herunterladen (Seite 14)

5 Installation

−14−

5 Installation

This chapter explains the installation location and installation methods of the motor

and driver, as well as how to install a load. The installation and wiring methods in

compliance with the EMC Directive are also explained.

5.1 Location for installation

The motor and driver are designed and manufactured for installation in equipment.

Install them in a well-ventilated location that provides easy access for inspection.

The location must also satisfy the following conditions:

• Inside an enclosure that is installed indoors (provide vent holes)

• Operating ambient temperature

Motor: −10 to +50 °C (+14 to +122 °F) (non-freezing)

Driver: 0 to +40 °C (+32 to +104 °F) (non-freezing)

• Operating ambient humidity 85% or less (non-condensing)

• Area that is free of explosive atmosphere or toxic gas (such as sulfuric gas) or liquid

• Area not exposed to direct sun

• Area free of excessive amount of dust, iron particles or the like

• Area not subject to splashing water (rains, water droplets), oil (oil droplets) or

other liquids

• Area free of excessive salt

• Area not subject to continuous vibration or excessive shocks

• Area free of excessive electromagnetic noise (from welders, power machinery, etc.)

• Area free of radioactive materials, magnetic fields or vacuum

5.2 Installing the motor



Installation direction

The motor can be installed in any direction.



Installation method

Install the motor onto an appropriate flat metal plate having excellent vibration

resistance and heat conductivity.

When installing the motor, secure it with four bolts (supplied for SH geared type

only) through the four mounting holes provided. Do not leave a gap between the

motor and metal plate.

Note

•

Insert the pilot located on the motor’s installation surface into the mounting

plate’s countersunk or through hole.

•

Do not loosen the gearhead attaching screws (4 pcs.)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 47 48

Keine Kommentare

HP SG3-300 Spezifikationen Seite 14