HP 4400 Installationsanleitung PDF herunterladen (Seite 20)

3. Loosen the locking nut (1, Figure 7) on the shipping retaining bracket (2) and slide the bracket

to the farthest position on the rear of the rail. This moves the bracket out of the way to allow you

to install the chassis in the rails.

NOTE:

Figure 7 shows a disk enclosure rail and bracket. If you are installing a longer chassis into your

cabinet, such as a chassis for a controller enclosure, see Attach the brackets for a longer chassis

for additional information.

Figure 7 Locking nut and retaining bracket

4. After attaching the rail, grab and move the rail gently to be sure it is firmly engaged in the rack

and that all latches are engaged in the rack holes.

5. Repeat Step 1 through Step 4 for the other rail.

Install the enclosures

To install disk and controller enclosures:

1. Remove the bezels installed over the thumbscrews on the front of the enclosure (Figure 8).

Install components20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

Keine Kommentare

HP 4400 Installationsanleitung Seite 20