HP Printer PCLA8205B Bedienungsanleitung PDF herunterladen (Seite 30)

3 Connecting to a Windows NT Server 3.51

Windows NT Workstation Version 4.0

Windows NT

Workstation

Version 4.0

Requirements

• HP Vectra with Windows NT Workstation 4.0 Service Pack 3.

• Intel EtherExpress PRO/10+ ISA Ethernet card and drivers disk.

• Driver Name: EPRO.SYS Size: 11KB Date: 4/14/97

• Microsoft Windows NT Workstation 4.0 and Service Pack Media.

(If you have a Hewlett-Packard preloaded HDD, the media is located at

“C:\I386”)

• Microsoft Windows NT Server 3.51 machine that supports Net BEUI, TCP/

IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

Device Configuration

• Board Connector type Auto-detect

• Force 8-bit operation Yes

• Flash chip address Disabled

• Remote boot program None

Procedure

1 With the HP Vectra turned off, install the Intel EtherExpress PRO 10+ ISA

Ethernet adapter card into an ISA slot.

2 Connect network cable media to the Intel EtherExpress PRO ISA

Ethernet adapter card.

3 Insert a DOS bootable diskette and power on the machine.

4 After booting, insert the Intel EtherExpress drivers disk Ver. 3.5, and

execute “A:\SOFTSET2.EXE.”

5 Select “Change Adapter configuration” and verify the resource settings

listed above under the heading “Device Configuration.”

6 If changes are required, save those changes and exit.

Vectra VL8 Vectra VL7 Vectra VE7/VE8

I/O Address 210-21Fh 210-21Fh 300-30Fh

Interrupt 10 10 11 (16 bit only)

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 48 49

Keine Kommentare

HP Printer PCLA8205B Bedienungsanleitung Seite 30