HP Jetdirect 2700w USB Wireless Print Server Bedienungsanleitung PDF herunterladen (Seite 11)

4. Select Authentication, select the security level provided by your system administrator previously,

and then select Save.

5. If you selected WPA-PSK as the authentication type, then set the password.

a. Select Configure PSK and then select Pass-Phrase.

b. Type the password provided by your system administrator previously, and then select Save.

6. If the printer is in Config mode, reboot the printer to return the printer to a Ready state.

7. Make sure the HP Jetdirect 2700w IP address has been assigned.

NOTE: The wireless IP address is dierent than the printer’s IP address. It may take some time for the

HP Jetdirect 2700w IP address to display depending on the network speed.

●

For touchscreen control panels, select the wireless icon from the Home screen. A list of IP

addresses or host names associated with the printer are displayed.

●

For 4–line control panel displays, print a ‘How To Connect’ page from the main menu. If the

HP Jetdirect 2700w IP address is not listed, wait a few minutes and try again.

When the HP Jetdirect 2700w IP address is listed, you are ready to print. For information on how

to print, go to www.hp.com/go/MobilePrinting.

For more information

For additional conguration information about HP print servers, including the HP Jetdirect 2700w Print

Server, see the HP Jetdirect Print Servers Administrator’s Guide Addendum available at www.hp.com/support/

jd2700w under Manuals > General reference.

ENWW For more information 5

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

Keine Kommentare

HP Jetdirect 2700w USB Wireless Print Server Bedienungsanleitung Seite 11