HP Fiber-Optic Hub Plus Betriebsanweisung PDF herunterladen (Seite 16)

Network Address. The communication between the hub and the network management station

requires that the hub be assigned a network address. If you are using your hub in a Novell

NetWare network, it can be automatically configured with an IPX address from an IPX router

on the network. The hub is preconfigured to enable this function. Alternatively, if you are

using the hub in a network that uses the Internet Protocol (IP), you manually configure the hub

with an IP address using the hub console’s IP command. See the IP command description in

chapter 3, “Operation”, and appendix D, “Network Addressing”, for more information on

configuring a network-layer address on the hub.

When configured with an IP address, the hub can also send and respond to network-layer test

packets (ICMP Echo Request, or “Ping” packets).

Using Non-HP Network Management. To manage the HP Fiber-Optic Hub Plus with a

non-HP network management product, you must first obtain HP’s Network Management

Information Base (MIB) extensions. The HP MIB extensions are available on request. Contact

your HP-authorized LAN dealer or local HP sales office.

1-8 Introducing the HP Fiber-Optic Hub Plus

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 83 84

Keine Kommentare

HP Fiber-Optic Hub Plus Betriebsanweisung Seite 16