HP F100 Bedienungsanleitung PDF herunterladen (Seite 10)

10 HP ProLiant Cluster F100 Installation Guide

Because clients desiring the full advantage of the cluster will now connect to the

cluster rather than to a specific server, configuring client connections will differ

from those for a stand-alone server. Clients will connect to virtual servers, which

are cluster groups that contain their own IP addresses.

Private or Public Interconnect

There are two types of interconnect paths:

•

Private interconnect

Public interconnect

For more information on recommended interconnect strategies, refer to the white

paper, Best Practices Checklist—Increasing Network Fault Tolerance in a

Microsoft® Windows® Server 2003, Enterprise Edition High Availability Server

Cluster, available from the ProLiant High Availability website

(http://www.hp.com/servers/proliant/highavailability

Interconnect Adapters

Ethernet adapters and switches are supported as interconnects in ProLiant

clusters. Either a 10-Mb/s, 100-Mb/s, or 1000-Mb/s Ethernet adapter can be used.

Ethernet adapters can be connected together using an Ethernet crossover cable or

a private Ethernet hub. Both of these options provide a dedicated interconnect.

Implementing a direct Ethernet connection minimizes potential single points of

failure.

NOTE: An Ethernet crossover cable is provided in the HP ProLiant

Cluster Starter kit.

Redundant Interconnects

To reduce potential disruptions of intracluster communication, use a redundant

path over which communication can continue if the primary path is disrupted.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Keine Kommentare

HP F100 Bedienungsanleitung Seite 10