HP 100VG Betriebsanweisung PDF herunterladen (Seite 4)

Features

If the optional HP 100VG SNMP/Bridge Module is installed in your hub, the

hub functionality is enhanced with these additional features:

■ SNMP agent code enabling the hub to be managed remotely from a

network management station that supports Simple Network Management

Protocol (SNMP) over IP or Novell NetWare (IPX).

■ ASCII console where you can diagnose and configure the hub through

a serial connection or by using Telnet.

■ 10:100 and 100:10 bridge functionality for connecting the

HP 100VG LAN (or 100 Mbit/s network) to an Ethernet/IEEE 802.3 LAN

(or 10 Mbit/s network). The bridge supports up to 1,024 addresses (512

for 100VG and the other 512 for Ethernet). The HP J2414B product has a

transceiver port that accepts any of the following optional 10Base-T

modules:

• HP J2606A Fiber-Optic Transceiver Module

• HP J2607A Twisted-Pair Transceiver Module

• HP J2608 ThinLAN Transceiver Module

• HP J2609A AUI Port Module

■ Updatable firmware that enables enhancements to be downloaded

either from a computer attached to the out-of-band management port or

over the network. You can get the new firmware from sources such as

the World Wide Web as described later in this manual.

■ Advanced integrated design including an Intel i960 RISC processor, 2

megabytes of RAM, and 1 megabyte of flash memory for boot-up firmware

and non-volatile parameter storage.

■ HP EASE (Embedded Advanced Sampling Environment) for trend anal-

ysis of your network.

If you also purchased an HP Dial-A-LAN or HP Router bundle, see their

manuals for those remote server or routing features.

1 2 3 4 5 6 7 8 9 ... 45 46

Keine Kommentare

HP 100VG Betriebsanweisung Seite 4