HP Ethernet BL-c Switch Bedienungsanleitung PDF herunterladen (Seite 45)

Performing a serial download 45

Serial upgrade of operating system firmware

procedure

To perform a serial upgrade of the switch operating system firmware image, usually named GbE2c-1-

10G_100.bin:

1. Using the null modem cable, connect the console port of the switch to the serial port of a PC that

supports XModem/1K XModem.

2. Start HyperTerminal (part of Microsoft Windows) or equivalent terminal emulation application

(depending on the computer operating system) and set the parameters for terminal emulation

console:

Parameter Value

Baud rate 9600

Data bits 8

Parity None

Stop bits 1

Flow control None

3. Power on the switch.

4. Hold down the Shift key and press the D key repeatedly during the Memory Test, until this message

appears:

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 65 66

Keine Kommentare

HP Ethernet BL-c Switch Bedienungsanleitung Seite 45