HP 1200S Installationsanleitung PDF herunterladen (Seite 29)

NAS 1200s Installation Guide 29

Remote Browser Method (using Hostname)

The NAS 1200s ships with DHCP enabled on the network port. If

the system is placed on a DHCP enabled network and the serial

number of the device is known, it can be accessed through a client

running Internet Explorer 5.5 (or later) on that network, using the

3202 port of the device. The serial number is located below the

power source on the back of the NAS 1200s, as illustrated in

Figure 5.

Figure 5: Serial number location

Requirements

The following items are required to run the WebUI configuration

application:

■ Windows-based PC loaded with Internet Explorer 5.5 (or

later) on the same segment as the NAS 1200s

■ DHCP-enabled network

■ Serial number of the NAS 1200s

Procedure

To initialize the NAS 1200s:

1. Connect the Ethernet cables to the respective network ports

of the NAS 1200s and the corresponding network segments.

See Figure 2 and Table 2 on page 19 for the locations of the

network ports on the NAS 1200s.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 47 48

Keine Kommentare

HP 1200S Installationsanleitung Seite 29