HP C6300 Bedienungsanleitung PDF herunterladen (Seite 137)

To clean the glass

1. Turn off the product, unplug the power cord, and raise the lid.

2. Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive

glass cleaner.

CAUTION: Do not use abrasives, acetone, benzene, or carbon tetrachloride on

the glass, since they can damage it. Do not place or spray liquid directly on the

glass. The liquid might seep under the glass and damage the product.

3. Dry the glass with a dry, soft, lint-free cloth to prevent spotting.

4. Turn on the product.

Clean the lid backing

Minor debris can accumulate on the white document backing located underneath the lid

of the HP All-in-One.

To clean the lid backing

1. Turn off the product, unplug the power cord, and raise the lid.

2. Clean the white document backing with a soft cloth or sponge slightly moistened with

a mild soap and warm water.

Wash the backing gently to loosen debris. Do not scrub the backing.

3. Dry the backing with a dry, soft, lint-free cloth.

CAUTION: Do not use paper-based wipes, as these might scratch the backing.

4. If further cleaning is needed, repeat the previous steps using isopropyl (rubbing)

alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual

alcohol.

CAUTION: Be careful not to spill alcohol on the glass or exterior of the product,

as this might damage it.

5. Plug in the power cord, and then turn on the product.

Chapter 12

134 Maintain the HP All-in-One

Maintain the HP All-in-One

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 330 331

Keine Kommentare

HP C6300 Bedienungsanleitung Seite 137