
c04111527 — DA – 14262 Worldwide — Version 42 — June 25, 2014
Sub-Section Description/Notes
NOTE: SAS Controller add-in card required
SATA (Serial ATA) Hard Drives for HP Workstations
500GB SATA 7200 rpm 6Gb/s 3.5" HDD
500GB SATA 7.2K SED SFF HDD
1TB SATA 7200 rpm 6Gb/s 3.5" HDD
2.0TB SATA 7200 rpm 6Gb/s 3.5" HDD
3.0TB SATA 7200 rpm 6Gb/s 3.5" HDD
250GB SATA 10K rpm SFF HDD
500GB SATA 10K rpm SFF HDD
HP Solid State Drives (SSDs) for Workstations
HP 256GB SATA 6Gb/s SED SSD
Intel Pro 1500 180GB SATA SSD
Samsung SM843T 240GB SATA SSD
Samsung SM843T 480GB SATA SSD
PCIe SSDs for HP Workstations
HP Z Turbo Drive 256GB SSD*
HP Z Turbo Drive 512GB SSD*
Fusion ioFX 410GB PCIe Accelerator
* Each drive requires a PCIe x4 (minimum) slot to be available. Full performance is obtained only when
using PCIe slots connected to the CPU. Non-CPU PCIe slots may see a decrease of up to 10%. Please see
slot configuration recommendations at www.hp.com/go/zturbo. Note that graphics cards,
Thunderbolt™, and other devices will require PCIe slots.
For hard drives, 1 GB = 1 billion bytes; TB = 1 trillion bytes. Actual formatted capacity is less. Up to 12
GB of hard drive (or system disk) is reserved for the system recovery software (XP and XP Pro). Up to 3
GB of system disk is reserved for system recovery software (Vista).
Up to 4 drives are allowed. The 4th drive will occupy one of the external 5.25" bays.
Integrated SATA 6.0 Gb/s Controller
Integrated SATA 6.0 Gb/s Controller
Integrated SATA 3.0 Gb/s Controller
Integrated SATA 3.0 Gb/s Controller
Factory integrated RAID on motherboard for SATA drives
Kommentare zu diesen Handbüchern