HP 6631B Bedienungsanleitung PDF herunterladen (Seite 47)

Front Panel Operation - 5

7 - Saving and Recalling Operating States

NOTE: This capability is only available when the unit is set to the SCPI programming

language.

You can save up to 4 states (from location 0 to location 3) in non-volatile memory and recall them

from the front panel. All programmable settings are saved.

Save an operating state in location 1 as follows:

Action Display

1. Set the instrument to the operating state that you want to save.

2. Save this state to location 1. Press Save, 1, Enter. *SAV 1

Recall a saved state as follows:

Action Display

1. Recall the state saved in location 1 by pressing Recall, 1, Enter *RCL 1

Select the power-on state of the dc source as follows:

Action Display

1. On the Function keypad, press Output, and scroll through the Output

menu until you get to the PON state command.

PON:STATE RST

2. Use the ã and ä keys to select either RST or RCL0. RST sets the power-

on state of the unit as defined by the *RST command. RCL0 sets the

power-on state of the unit to the state saved in *RCL location 0.

Clear the non-volatile memory of the dc source as follows:

Action Display

1. On the Function keypad, press Output, Enter. This returns the unit to

the factory-default settings.

*RST

2. Save these settings to location 1. Press Save, 1, Enter. *SAV 1

3. Repeat step #2 for memory locations 2 through 4.. *SAV 2

*SAV 3

*SAV 4

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 74 75

Keine Kommentare

HP 6631B Bedienungsanleitung Seite 47