HP md5020n Bedienungsanleitung PDF herunterladen (Seite 30)

Setting Up the TV30

4. Insert the CableCARD module 1 into the opening and firmly press it into place until the front plate is

flush with the panel.

5. Tighten the two screws

Installing a CableCARD

You must obtain the CableCARD from your local cable provider. After installing the card, follow any setup

instructions provided with the card.

1. Hold the CableCARD with the front label facing up, and then insert it into the CableCARD slot.

2. Gently push the card into the slot until it stops. When fully inserted, the card sticks out of the slot.

3. Press Settings, go to Setup > Channel setup > Cable card, and press OK. Your cable provider uses the

information in the CableCARD screens to activate and configure the CableCARD.

To remove the CableCARD, pull the card out of the slot. The CableCARD functions are automatically

removed.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 79 80

Keine Kommentare

HP md5020n Bedienungsanleitung Seite 30