HP omnibook XE2 Bedienungsanleitung PDF herunterladen (Seite 31)

HP OmniBook XE2 Removal and Replacement 2-11

Removing the Display Assembly

(HP Authorized Service Providers Only)

Required Equipment

• Small Phillips screwdriver.

• Plastic knife or small flat-blade screwdriver.

Removal Procedure

1. Unplug the AC adapter, if present, and remove the battery.

2. Open the display completely (180 degrees).

3. Use a plastic knife or small flat-blade screwdriver to gently pry up the right side of the keyboard

cover.

4. Remove the cover by pulling it to your right.

5. Use a Phillips screwdriver to remove the four screws from the hinge covers.

6. Remove the hinge covers with your fingers. Do not use a tool.

7. Unplug the cable by grasping both ends of the connector and pulling toward you.

8. Use a Phillips screwdriver to remove the four screws from the hinges.

Figure 2-7. Removing the Display Assembly

Reassembly Notes

• You may need to use a flat-blade screwdriver to reconnect the cable.

“Step 5” screws (4):

M2.5×4mm

“Step 8” screws (4):

M2.5×5mm

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 84 85

Keine Kommentare

HP omnibook XE2 Bedienungsanleitung Seite 31