Hp OmniBook 4100 Notebook PC Bedienungsanleitung PDF herunterladen (Seite 24)

Troubleshooting

7SPZMRK4VSFPIQW[MXL4PYK-R%GGIWWSVMIW

1-24

CD-ROM drive problems

If the CD-ROM drive stops responding

• Remove and reinsert the CD disk.

• Restart the OmniBook.

• If restarting the OmniBook does not solve the problem, remove and reinsert the

CD-ROM module.

If you cannot boot from a CD in the CD-ROM drive

• Check that the CD is bootable.

• Restart the OmniBook.

• Remove and reinsert the CD-ROM module.

• Run the BIOS Setup utility to make sure that the CD-ROM drive is the first boot

devices. See the OmniBook Reference Guide for instructions on running the

BIOS Setup utility.

LS-120 drive problems

If the LS-120 drive doesn’t work

• Remove and reinsert the LS-120 disk.

• Restart the OmniBook.

• Remove and reinsert the LS-120 module.

• If you are using Windows NT, look for information about updated LS-120 NT

drivers in the readme file on the floppy disk included with your LS-120 drive.

You can also connect to the OmniBook website for updated drivers at

http://www.hp.com/omnibook.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 34 35

Keine Kommentare

Hp OmniBook 4100 Notebook PC Bedienungsanleitung Seite 24