HP OMNIBOOK 2000 Bedienungsanleitung PDF herunterladen (Seite 98)

Floppy Disk Drive

The floppy disk drive can either be placed in the center bay slot or connected to the parallel port.

It is hot-swappable and is configured as drive A by default.

Floppy disk drive manufacturers are subject to change without notice.

Table 25 - Floppy Disk Drive Specifications

3.5-inch Floppy Drive

Manufacturer TEAC

Data Capacity 1.44MB (formatted)

2M (unformatted)

724KB (formatted)

1M (unformatted)

Data Transfer Rate 500k bits/sec 250k bits/sec

Disk Rotational Speed 300rpm

Track Density 135tpi

Cylinders 80

Track-to-track Time 3ms

Average Seek Time 94ms

Start Time 480ms

Average latency 100ms

Mean Time Between

Failures

30,000 hours

Error Rate

Soft (recoverable) 1 or less per 10

bits read

Hard

(unrecoverable)

1 or less per 10

bits read

Seek 1 or less per 10

bits read

CD-ROM Drive

The CD-ROM Drive is an accessory to the OmniBook. It is designed to operate only in the

center bay.

CD-ROM drive manufacturers are subject to change without notice.

Table 26 - CD-ROM Drive Specifications

6x CD-ROM Drive 10x CD-ROM Drive

Manufacturer Toshiba Toshiba

Transfer Rate 900K sustained 1710 KB/sec max

Buffer 128K 128K

Access Speed 190ms 150ms

Start-up Time 2.3 s (6x) 2.3 s (10x)

Seek Time 160ms 130ms

Modes CDROM (Mode 1&2), Photo CD, CD

Plus, CDXA, CD-I, Multisession

CDROM (Mode 1&2), Photo CD, CD

Plus, CDXA, CD-I, Multisession

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 117 118

Kommentare zu diesen Handbüchern

Keine Kommentare

HP OMNIBOOK 2000 Bedienungsanleitung Seite 98

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Notebooks HP OMNIBOOK 2000