HP Computer Spezifikationen PDF herunterladen (Seite 56)

Reverse this procedure to reassemble and install the display assembly.

Power connector cable

Description Spare part number

Power connector cable (includes tape) 796086-001

Before removing the power connector cable, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the keyboard/top cover (see

Keyboard/top cover on page 23).

5. Disconnect the battery cable from the system board (see

Battery on page 33).

6. Remove the display assembly (see

Display assembly – non-touchscreen models on page 40) or Display

assembly – touchscreen models on page 46.

Remove the power connector cable:

1. Disconnect the power connector cable (1) from the system board.

2. Release the power connector (2) from the retention clips built into the bottom cover.

3. Remove the power connector cable (3).

Reverse this procedure to install the power connector cable.

50 Chapter 5 Removal and replacement procedures forAuthorized Service Provider parts

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 71 72

Keine Kommentare

HP Computer Spezifikationen Seite 56