HP Compaq d330 MT Betriebsanweisung PDF herunterladen (Seite 29)

Hardware Reference Guide www.hp.com 2–19

Hardware Upgrades

6. Turn on the computer.

If you have installed a PATA hard drive that is not automatically

recognized by the computer, see Appendix B, “PATA Hard Drive

Installation Guidelines.”

If you have installed a SATA hard drive that is not automatically

recognized by the computer, refer to the white paper “Implementation

of Serial ATA on HP Business Desktops” for operating system

instructions. The white paper is located at www.hp.com/support.

✎

If you replaced the primary hard drive, insert the Restore Plus! CD to

restore the operating system, software drivers, and/or any software

applications that were preinstalled on the computer from HP. Follow

the instructions in the guide included with the restore CD. When the

restore process has completed, reinstall any personal files that you

backed up before replacing the hard drive.

Removing or Installing an Expansion Card

No tools are needed to remove, replace, or add an expansion card.

1. If you have locked the Smart Cover Lock, use Computer Setup to

unlock the lock.

2. Turn off the computer properly through the operating system and

turn off any external devices. Disconnect the power cord from the

power outlet and disconnect any external devices.

3. Remove the access panel and lay the computer on its side with the

opening to internal parts where the access panel was located

facing up.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 65 66

Keine Kommentare

HP Compaq d330 MT Betriebsanweisung Seite 29