HP 4320t Betriebsanweisung PDF herunterladen (Seite 79)

To enable a USB device or a NIC device as a boot device, follow these steps:

1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the

“F10 BIOS Setup" message is displayed in the lower-middle corner of the screen. You can also

press f10 when the HP Logo is being displayed and the "F10 BIOS Setup" string is not displayed

anymore.

2. To enable bootable media in USB drives or in drives inserted into an optional docking device

(select models only), use the arrow keys to select System Configuration > Device

Configurations, and then press enter. Use the arrow keys to select Enable in the USB legacy

support field.

NOTE: The USB Port option must be enabled in order to use USB legacy support. It is enabled

at the factory. To disable or reenable this option, select System Configuration > Port Options.

– or –

To enable a NIC device, use the arrow keys to select System > Boot options, and then press

enter. Use the arrow keys to select Enable in the Internal network adapter boot field.

3. To save your preferences and exit Computer Setup, use the arrow keys to select File > Save

changes and exit. Then follow the instructions on the screen.

Your preferences go into effect when the computer restarts.

Considering boot order changes

Before changing the boot order, note the following considerations:

● When the computer restarts after the boot order has been changed, the computer attempts to

start using the new boot order.

●

If there is more than one type of boot device, the computer attempts to boot using the first of

each type of boot device (except for optical devices).

●

Changing the boot order also changes the logical drive designations.

● The computer will boot from a NIC device only if the device has been enabled in the Built-In

Device Options menu of Computer Setup and if booting from the device has been enabled in the

Boot Options menu of Computer Setup. Booting from a NIC does not affect logical drive

designations because no drive letter is associated with the NIC.

●

Drives in an optional docking device (select models only) are treated like external USB devices

in the boot order.

Choosing MultiBoot preferences

You can use MultiBoot in the following ways:

● To set a new boot order that the computer uses each time it is turned on by changing the boot

order in Computer Setup.

● To dynamically choose the boot device, press f9 while the “F9 Press ESC for Startup Menu”

message is displayed in the lower-middle corner of the screen when the computer starts up. You

can also press the Escape key when the “Press ESC for Startup Menu” message displays and

then press f9.

●

To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device

each time the computer is turned on or restarted.

Considering boot order changes 69

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 4320t Betriebsanweisung Seite 79

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Notebooks HP 4320t