HP 210-1060EV Technical Information PDF herunterladen (Seite 50)

3. Remove the hard drive (4) by sliding it up and to the right at an angle.

4. If it is necessary to replace the hard drive bracket, follow these steps:

a. Disconnect the cable adapter (1) from the hard drive.

b. Remove the four Phillips PM3.0×3.0 screws (2) that secure the hard drive bracket to the

drive.

c. Remove the hard drive bracket (3).

d. Remove the four rubber isolators (4) from the bracket.

Reverse this procedure to reassemble and install the hard drive.

42 Chapter 4 Removal and replacement procedures

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 104 105

Keine Kommentare

HP 210-1060EV Technical Information Seite 50