HP 17-j070ca Technical Information PDF herunterladen (Seite 59)

Remove the keyboard:

1. Remove the three Phillips PM 2.5×5.0 screws (1) and the Phillips PM 2.5×7.0 (2) screw that

secure the keyboard to the computer.

Lift the rear edge of the keyboard (1) until it rests at an angle.

Slide the keyboard (2) toward the display until the tabs on the front edge of keyboard disengage

from the slots in the top cover.

4. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and

then disconnect the keyboard cable (2) from the system board.

ENWW

Component replacement procedures

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 115 116

Keine Kommentare

HP 17-j070ca Technical Information Seite 59