HP Modular Cooling System Bedienungsanleitung PDF herunterladen (Seite 31)

Management module 31

• Warning Temperature Threshold—Temperature difference above Server Intake Temperature Set Point

for temperature warning message

• Low Temperature Threshold—Temperature difference below Server Intake Temperature Set Point for

temperature warning message

The following values are displayed in the web interface for information only:

• Fan Speed Target—Displays the percentage of the fan maximum speed

• Water Valve—Displays the water valve state

• Cooling Module 1 through 3—Displays the Server Intake and Server Exhaust Temperature and the

RPM of each cooling unit

• Water Inlet Temperature—Displays the temperature of the water coming into the MCS unit to be

used to cool the servers

• Water Outlet Temperature—Displays the temperature of the water after removing the server heat

• Water Flow—Displays the value of the water flow in liters/gallons per minute

Management module components

The management module is located on the inside of the MCS front door.

Item Reference Description

1 C key Used to confirm warnings, critical alarms, and

configuration setting changes, as well as to turn off the

audible alarm. Press and hold the C key for five

seconds, or click the Clear Alarms button on the Web

interface Setup tab>General menu, to confirm these

situations.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 83 84

Keine Kommentare

HP Modular Cooling System Bedienungsanleitung Seite 31