HP Compaq 8100 Elite Series Betriebsanweisung PDF herunterladen (Seite 17)

Installing Additional Memory

The computer comes with double data rate 3 synchronous dynamic random access memory (DDR3-

SDRAM) dual inline memory modules (DIMMs).

DIMMs

The memory sockets on the system board can be populated with up to four industry-standard DIMMs.

These memory sockets are populated with at least one preinstalled DIMM. To achieve the maximum

memory support, you can populate the system board with up to 16-GB of memory.

DDR3-SDRAM DIMMs

For proper system operation, the DDR3-SDRAM DIMMs must be:

●

industry-standard 240-pin

●

unbuffered non-ECC PC3-8500 DDR3-1066 MHz-compliant or PC3-10600 DDR3-1333 MHz-

compliant

●

unbuffered ECC PC3-10600 DDR3-1333 MHz-compliant (Z200 SFF only)

●

1.5 volt DDR3-SDRAM DIMMs

The DDR3-SDRAM DIMMs must also:

●

support CAS latency 7 DDR3 1066 MHz (7-7-7 timing) and CAS latency 9 DDR3 1333 MHz (9-9-9

timing)

●

contain the mandatory JEDEC SPD information

In addition, the computer supports:

●

single-sided and double-sided DIMMs

●

DIMMs constructed with x8 and x16 DDR devices; DIMMs constructed with x4 SDRAM are not

supported

NOTE: The 8100 SFF supports 512Mbit, 1Gbit, and 2Gbit non-ECC memory technologies. The

Z200 SFF supports 512Mbit, 1Gbit, and 2Gbit ECC and non-ECC memory technologies.

NOTE: The system will not operate properly if you install unsupported DIMMs.

ENWW Installing Additional Memory 11

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 57 58

Keine Kommentare

HP Compaq 8100 Elite Series Betriebsanweisung Seite 17