Hp PROCURVE 530 Bedienungsanleitung PDF herunterladen (Seite 49)

3-7

Getting Started With Access Point Configuration

Getting Started With Access

Point Configuration

5. To enable radio 1 for the access point, type exit to return to the configu-

ration mode for radio 1, then type enable to enable the radio.

6. To configure the access point’s radio 2 interface, type radio 2 and repeat

steps 1 to 4. Note that when the radio 2 interface mode is set to 802.11a,

the available channels are 36 to 165, depending on the country setting.

7. To save all configuration settings from the running configuration file to

the startup configuration file, type write memory from any command level.

ProCurve Access Point 530(radio1-wlan1)# exit

ProCurve Access Point 530(radio1)# enable

ProCurve Access Point 530(radio1)#

ProCurve Access Point 530(radio1-wlan1)# write memory

ProCurve Access Point 530(radio1-wlan1)#

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 113 114

Keine Kommentare

Hp PROCURVE 530 Bedienungsanleitung Seite 49