HP XP7000 Schnellstart Benutzerhandbuch PDF herunterladen (Seite 50)

Installing Permanently50

Room controller commands

In the following tables, if the parameter listing for a particular command is “None,” that

command requires no parameter. Some commands are valid only when the projector is turned

on, STAT=1. Some commands are available only when specific input sources are active.

Source function

Command Parameters Description

SRC ? Queries the current active input source: 0=no active

source,1=VGA-in, 3=composite video, 4=S-video, 8=DVI.

RSRC 1, 3, 4, 8, ? Attempts to use the specified source as the active input

source, or queries the last source requested: 1=VGA-in,

3=composite video, 4=S-video, 8=DVI.

NXT None Switches to the next input source.

AUTO 0, 1, ? Sets or queries automatic searching inputs for signal: 0=no

searching, 1=searching.

Video functions

Command Parameters Description

CSPC 0 to 2, ? Sets or queries the active color space: 0=RGB, 1=YPbPr,

2=YCbCr.

PMOD 0,1,5,? Sets or queries the picture mode: 0=graphics, 1=video,

5=custom.

VSHF value, +, –, ? Sets or queries the vertical shift of the projected image:

usable range is determined by the active input source.

HSHF value, +, –, ? Sets or queries the horizontal shift of the projected image:

usable range is determined by the active input source.

WHIT 0 to 10, +, –, ? Sets or queries the white intensity.

BRT 0 to 100, +, –, ? Sets or queries the brightness.

CON 0 to 100, +, –-, ? Sets or queries the contrast.

SAT 0 to 100, +, –, ? Sets or queries the color saturation.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 71 72

Keine Kommentare

HP XP7000 Schnellstart Benutzerhandbuch Seite 50