Hp ZX6000 Bedienungsanleitung PDF herunterladen (Seite 22)

1–16 HP Integrity rx2600 server and HP workstation zx6000 Getting Started Guide

Setting Up and Using Your System

To access the EFI remotely:

1. With the workstation turned off, connect the serial cable provided

with your system (HP part number 5182-4794) or a compatible

cable to Serial Port A on the rear panel of the workstation, and to

your remote device.

2. Configure the terminal emulation software with these settings:

❏ Baud rate: 9600

❏ Bits: 8

❏ Parity: None

❏ Stop Bits: 1 (one)

❏ Flow Control: XON/XOFF

3. Using the terminal emulation software, connect to the

workstation with a direct connection.

NOTE: The default terminal emulation type is VT100+. This setting

can be changed from the EFI Boot Options Maintenance Menu.

4. Turn on the workstation and follow the steps below to access

the EFI.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 63 64

Keine Kommentare

Hp ZX6000 Bedienungsanleitung Seite 22