Hp DX7500 Bedienungsanleitung PDF herunterladen (Seite 42)

2. Slide the new drive into the hard drive cage (1), aligning the drive with the four screw holes on the

cage. Install the four 6-32 standard screws that secure the hard disk drive to the hard drive cage

(2). Make sure the hard disk drive cables are facing the top of the drive cage.

NOTE: If you are replacing an old drive with a new drive, use the four retainer screws from the

old drive to install the new drive.

NOTE: If you are installing a second hard drive, use four of the extra standard 6-32 screws that

are installed on the interior of the front bezel. The 6-32 screws are silver. Refer to

Installing

Additional Drives on page 24 for an illustration of the retainer screws location.

Figure 2-31 Installing the Hard Drive in the Drive Cage

36 Chapter 2 Hardware Upgrades ENWW

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 57 58

Keine Kommentare

Hp DX7500 Bedienungsanleitung Seite 42