Hp ProLiant WS460c G6 Workstation-Blade Bedienungsanleitung PDF herunterladen (Seite 31)

Hardware options installation 31

Prepare the hard drive.

3. Install the hard drive.

4. Determine the status of the drive from the hot-plug SAS hard drive LED combinations ("SAS and SATA

hard drive LED combinations" on page 10).

Processor option

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION: To prevent possible workstation blade malfunction and damage to the equipment,

multiprocessor configurations must contain processors with the same part number.

CAUTION: To prevent possible workstation blade overheating, always populate processor

socket 2 with a processor and a heatsink or a processor socket cover and a heatsink blank.

CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the

heatsink is removed from the processor after it has been installed.

IMPORTANT: When installing the heatsink, align the guide pins on the processor retention

bracket with the alignment holes in the heatsink.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 108 109

Keine Kommentare

Hp ProLiant WS460c G6 Workstation-Blade Bedienungsanleitung Seite 31