Hp ProLiant DL380p Gen8 Server Bedienungsanleitung Seite 95
- Seite / 134
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Cabling 95
8.
Disconnect any SAS cables from the hard drive cage and either the embedded SAS controller or an
optional SAS controller. Do not disconnect the power cable.
9. Disconnect the SATA cable from the optical drive and the SATA connector on the system board. The
optical bay is disabled with the chipset SATA cable option.
10. Connect the chipset SATA cable:
a. Connect the chipset SATA cable connector to the chipset SATA controller port on the system board.
The chipset SATA connector on the SATA cable is narrower than the chipset SATA controller port
header on the system board.
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Contents 6 6
- Component identification 7
- • SFF model (25-drive) 8
- • LFF model (8-drive) 8
- Front panel LEDs and buttons 9
- Item Description Status 10
- Press and release the panel 10
- Systems Insight Display LEDs 11
- Rear panel components 13
- Rear panel LEDs and buttons 14
- System board components 15
- System maintenance switch 16
- NMI functionality 17
- SAS and SATA device numbers 18
- PCI riser cage LED 20
- Hot-plug fans 21
- Operations 23
- Remove the access panel 24
- Install the access panel 25
- Remove the hot-plug fan cage 26
- Remove the hot-plug fan 27
- Remove the PCI riser cage 29
- Install the PCI riser cage 30
- Remove the air baffle 32
- Optimum environment 34
- Temperature requirements 35
- Power requirements 36
- Rack warnings 37
- Installing hardware options 38
- Setup 39 39
- Registering the server 41
- Introduction 42
- Processor and fan option 42
- Install the heatsink 47
- Remove the two fan blanks 47
- Memory options 49
- DIMM identification 51
- Memory configurations 51
- Online spare population 53
- Installing a DIMM 54
- Hot-plug hard drive options 55
- Controller options 57
- 8 or 16 drive SFF 61
- 8 drive LFF 61
- Remove the Velcro liner 62
- Optical drive option 63
- 48V DC power supply option 66
- Replace the safety cover 69
- FlexibleLOM option 70
- Expansion board options 72
- Hard drive cage option 76
- Remove the fan cage 78
- 13. Connect the cables: 80
- Install the fan cage 83
- Install the air baffle 83
- 2U rack bezel option 85
- 7. Reboot the server 89
- Cabling 90
- Optical drive cabling 91
- FBWC cabling 92
- Chipset SATA cable option 93
- 150W PCIe power cable option 96
- Cabling 97 97
- Server mode 98
- HP product QuickSpecs 98
- HP iLO Management Engine 98
- Active Health System 99
- Intelligent Provisioning 100
- HP Insight Diagnostics 101
- Erase Utility 101
- HP Service Pack for ProLiant 102
- HP ROM-Based Setup Utility 103
- Boot options 104
- Auto-configuration process 104
- Utilities and features 105
- ROMPaq utility 107
- Automatic Server Recovery 107
- Keeping the system current 108
- Software and firmware 109
- Version control 109
- ProLiant servers 109
- Troubleshooting 111
- Battery replacement 112
- Regulatory information 113
- Electrostatic discharge 114
- Specifications 115
- Specification Value 117
- HP 750 W 48V CS Power Supply 119
- Support and other resources 120
- Customer Self Repair 122
- Reparo feito pelo cliente 124
- Acronyms and abbreviations 128
- Documentation feedback 131
- Index 132 132
- Index 133 133
- Index 134 134
Verwandte Produkte und Handbücher für Computerhardware Hp ProLiant DL380p Gen8 Server
(82 Seiten)Western Reserve Controls 1782-JDC manuály
Uživatelské manuály a uživatelské příručky pro Brány / ovladače Western Reserve Controls 1782-JDC.
Poskytujeme 3 manuály pdf Western Reserve Controls 1782-JDC ke stažení zdarma podle typů dokumentů: Uživatelský manuál
Kommentare zu diesen Handbüchern