Hp ProLiant DL360p Gen8 Server Bedienungsanleitung Seite 85
- Seite / 118
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Software and configuration utilities 85
Warning: The serial number should ONLY be modified by qualified service
personnel. This value should always match the serial number located on the
chassis.
5. Press the Enter key to clear the warning.
6. Enter the serial number and press the Enter key.
7. Select Product ID. The following warning appears:
Warning: The Product ID should ONLY be modified by qualified service
personnel. This value should always match the Product ID located on the
chassis.
8. Enter the product ID and press the Enter key.
9. Press the Esc key to close the menu.
10. Press the Esc key to exit RBSU.
11. Press the F10 key to confirm exiting RBSU. The server automatically reboots.
Utilities and features
Array Configuration Utility
ACU is a utility with the following features:
• Runs as a local application or remote service accessed through the HP System Management Homepage
• Supports online array capacity expansion, logical drive extension, assignment of online spares, and
RAID or stripe size migration
• Suggests the optimum configuration for an unconfigured system
• For supported controllers, provides access to licensed features, including:
o Moving and deleting individual logical volumes
o Advanced Capacity Expansion (SATA to SAS and SAS to SATA)
o Offline Split Mirror
o RAID 6 and RAID 60
o RAID 1 (ADM) and RAID 10 (ADM)
o HP Drive Erase
o Video-On-Demand Advanced Controller Settings
• Provides different operating modes, enabling faster configuration or greater control over the
configuration options
• Remains available any time that the server is on
• Displays on-screen tips for individual steps of a configuration procedure
• Provides context-sensitive searchable help content
• Provides diagnostic and SmartSSD Wear Gauge functionality on the Diagnostics tab
ACU is now available as an embedded utility, starting with HP ProLiant Gen8 servers. To access ACU, use
one of the following methods:
• If an optional controller is not installed, press F10 during boot.
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 7
- • 4 LFF 8
- • 10 SFF 8
- Front panel LEDs and buttons 9
- Rear panel components 10
- Rear panel LEDs and buttons 11
- System board components 12
- DIMM slots 13
- System maintenance switch 14
- NMI jumper 14
- Systems Insight Display LEDs 15
- Device numbers 17
- Fan modules 18
- Component identification 19 19
- Operations 20
- 10 SFF configuration 22
- Remove the access panel 23
- Install the access panel 23
- Remove the PCI riser cage 24
- Install the PCI riser cage 25
- Optimum environment 27
- Temperature requirements 28
- Power requirements 29
- Rack warnings 30
- Installing hardware options 31
- Registering the server 34
- Introduction 35
- Remove the heatsink blank: 36
- Caged heatsink blank 36
- Screw-down heatsink blank 36
- Caged heatsink 40
- Screw-down heatsink 40
- Memory options 42
- HP SmartMemory 44
- DIMM identification 46
- Memory configurations 46
- Online spare population 48
- Installing a DIMM 49
- 1. Remove the drive blank 51
- 2. Prepare the drive 51
- Controller options 56
- Front video adapter option 58
- FlexibleLOM option 59
- Expansion board option 61
- 48V DC power supply option 64
- Replace the safety cover 67
- Rack bezel option 68
- Cabling 72
- Chipset SATA cable option 73
- Cabling 75 75
- FBWC capacitor pack cabling 77
- Server mode 78
- HP product QuickSpecs 78
- HP iLO Management 78
- Active Health System 79
- Intelligent Provisioning 80
- HP Insight Diagnostics 81
- Erase Utility 81
- HP Service Pack for ProLiant 82
- HP ROM-Based Setup Utility 83
- Boot options 84
- Configuring AMP modes 84
- Utilities and features 85
- ROMPaq utility 87
- Automatic Server Recovery 87
- USB support 87
- Redundant ROM support 87
- Keeping the system current 88
- ProLiant servers 89
- Troubleshooting 90
- System battery 91
- System battery 92 92
- Regulatory information 93
- Warranty information 94
- Electrostatic discharge 95
- Specifications 96
- (94% efficiency) 100
- Support and other resources 103
- Customer Self Repair 105
- Reparo feito pelo cliente 107
- Acronyms and abbreviations 111
- Documentation feedback 114
- Index 115 115
- Index 116 116
- Index 117 117
- Index 118 118
Verwandte Produkte und Handbücher für Computerhardware Hp ProLiant DL360p Gen8 Server
(139 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.142 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern