Hp ProLiant DL360 G6 Server Bedienungsanleitung PDF herunterladen (Seite 67)

Hardware options installation 67

Install the TPM board. Press down on the connector to seat the board ("System board components" on

page 11).

6. Install the TPM security rivet by pressing the rivet firmly into the system board.

7. Install the PCI riser board assembly (on page 24).

8. Install the access panel (on page 21).

9. Slide the server into the rack.

10. Power up the server (on page 19).

Retaining the recovery key/password

The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after

BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery

key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of system

integrity.

To help ensure maximum security, observe the following guidelines when retaining the recovery

key/password:

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 126 127

Keine Kommentare

Hp ProLiant DL360 G6 Server Bedienungsanleitung Seite 67