Hp ProLiant BL20p G4 Server-Blade Bedienungsanleitung PDF herunterladen (Seite 34)

Local I/O cabling 34

Connect the local I/O cable to the I/O port on the server blade.

CAUTION: Disconnect the local I/O cable when not in use. The port and connector do not provide a

permanent connection. Rear iLO 2 connector performance degrades when the local I/O cable is

connected, even if the iLO 2 connector on the cable is not in use.

CAUTION: Before disconnecting the local I/O cable, observe the following guidelines:

• Completely log out of the current iLO 2 session before disconnecting from the iLO 2 port. Do not

remove the local I/O cable when the UID LED is flashing.

• Always squeeze the locking buttons on the side of the server blade connector before

disconnecting from the I/O port. Failure to do so can result in damage to the equipment.

Connecting locally to a server blade with video and

USB devices

Use the local I/O cable to connect a monitor and any of the following USB devices:

• USB hub

• USB keyboard

• USB mouse

• USB CD/DVD-ROM drive

• USB diskette drive

Numerous configurations are possible. This section offers two possible configurations.

Accessing a server blade with local KVM

CAUTION: Disconnect the local I/O cable when not in use. The port and connector do not provide a

permanent connection. Rear iLO 2 connector performance degrades when the local I/O cable is

connected, even if the iLO 2 connector on the cable is not in use.

NOTE: For this configuration, a USB hub is not necessary. To connect additional devices, use a USB

hub.

1. Connect the local I/O cable to the server blade ("Local administration using iLO 2" on page 33).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 90 91

Keine Kommentare

Hp ProLiant BL20p G4 Server-Blade Bedienungsanleitung Seite 34