Hp Netserver L Server series Bedienungsanleitung PDF herunterladen (Seite 48)

Chapter 5 Installing Additional Boards

Riser Board

Installed

Latch

PCI

Slot

Figure 5-5. Inserting PCI Board-Riser Board

12. Insert the PCI board and riser board into the PCI connector on the system board. See

Figure 5-5.

13. Secure the PCI board into the slot opening between the two tabs and close the latch.

See Figures 5-4 and 5-5.

14. If you have a longer PCI board, you must use the board clamp to install the board

into the Netserver. See Figure 5-6.

a. Raise the board clamp before installing the PCI board. See Figure 5-6.

b. Install the PCI board into the Netserver, securing the PCI board into the

slot opening between the two tabs. See Figures 5-4 and 5-5.

c. Lower the PCI board onto the tab rests. See Figure 5-6.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 139 140

Keine Kommentare

Hp Netserver L Server series Bedienungsanleitung Seite 48