Hp Virtual Connect 1.10Gb-F Ethernet Module for c-Cla Bedienungsanleitung PDF herunterladen (Seite 9)

Commands 9

Item Description

BAY

Optional. The bay number of the target module. If not specified, the default is all supported

modules.

-f version

Optional. Allow an update of same or older firmware versions.

VCM USER

Name of Virtual Connect user with Domain privileges. Required if an enclosure is in a

Virtual Connect domain.

VCM PASS

Password for the Virtual Connect user.

-q

Optional. Specifies that the firmware update does not prompt for confirmation before

updating, and uses the default answer for the confirmation (YES).

-o

Optional. Specifies VC-Enet Modules activation order. Supported activation order methods

are:

•

parallel—(Default) All modules are activated at the same time

•

odd-even—All modules in odd numbered bays are activated first, then modules in

even numbered bays

•

serial—Modules are activated one at a time starting with the highest numbered bay

through the lowest numbered

•

manual—Modules are updated but not activated. Use the VC Manager GUI or OA

GUI to activate (reboot) modules

Examples

Update multiple modules in an enclosure imported into a VC domain:

vcutil -a update -i 192.168.1.100 -u Administrator -p password -vcu John

-vcp vcPass -l C:\images\vcfw-120.bin

Update a single module in an enclosure not managed by Virtual Connect:

vcutil -a update -i 192.168.1.100 -u Administrator -p password -1

vcfw121.bin -b 3

Update a single module in an enclosure managed by Virtual Connect:

vcutil -a update -i 192.168.1.100 -u Administrator -p password -vcu John

-vcp vcPass -l C:\images\vcfw-120.bin

Perform an update and specify an activation ordering method:

vcutil -a update -i 192.168.1.100 -u Administrator -p password -vcu John

-vcp vcPass -l C:\images\vcfw-120.bin -o serial

Perform an update using a firmware image from a web server URL:

vcutil –a update –i 192.168.1.100 –u Administrator –p password –l

http://www.myserver.com/vcfw-120.bin

Perform an update using a firmware image from an FTP server on the network:

vcutil –a update –I 192.168.1.100 –u Administrator –p password –l

ftp://user:[email protected]/vcfw-120.bin

1 2 3 4 5 6 7 8 9 10 11 12 13

Kommentare zu diesen Handbüchern

Keine Kommentare

Hp Virtual Connect 1.10Gb-F Ethernet Module for c-Cla Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerzubehör Hp Virtual Connect 1.10Gb-F Ethernet Module for c-Cla