Hp NetRAID 1Si Controller Bedienungsanleitung PDF herunterladen (Seite 34)

Chapter 2 HP NetRAID Assistant

3. Reset the rate as necessary by dragging the slider with the mouse.

4. Click OK.

5. If you have more than one adapter, select the next adapter, and repeat this

procedure.

NOTE Clearing the configuration does not affect the rebuild rate.

Assign Global Hot Spares

To assign any physical drives to the global hot spare pool for the adapter:

1. Click on a Ready physical drive in the Physical Devices box.

You can select more than one Ready drive if you want to create more than

one global hot spare. Clicking on a Ready drive either selects it or

deselects it.

2. Drag the selected drives into the global hot spare pool.

Select Wizard

NOTE If any physical drives have been moved, added, removed,

changed, or changed in state since HP NetRAID Assistant was

started, rescan the drives by choosing the Adapter menu and

then selecting the Rescan option.

To launch the HP NetRAID Assistant Wizard:

1. Select the Configuration menu.

2. Choose the Wizard. The Wizard starting window is displayed with a

choice of Custom and Automatic configuration modes, as shown in

Figure 2-4.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 160 161

Keine Kommentare

Hp NetRAID 1Si Controller Bedienungsanleitung Seite 34