HP Compaq Microtower Business PC dx2300 Betriebsanweisung PDF herunterladen (Seite 18)

Replacing or Upgrading a Drive

The computer supports up to five drives that may be installed in various configurations.

This section describes the procedure for replacing or upgrading the storage drives. A Torx T-15

screwdriver is needed to remove and install the guide screws and retainer screws on a drive.

Locating Drive Positions

NOTE: The drive configuration shown below may be different than your computer model.

Figure 2-8 Drive Positions

1 External 5.25-inch half-height optical drive bay

2 External 5.25-inch half-height option drive bay

3 External 3.5-inch option drive bay (media card reader shown)

4 Internal 3.5-inch one-third height bay for optional secondary hard drive

5 Internal 3.5-inch one-third height bay for primary hard drive

The external 3.5" option drive bay accommodates a diskette drive or a media card reader.

12 Chapter 2 Hardware Upgrades ENWW

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Keine Kommentare

HP Compaq Microtower Business PC dx2300 Betriebsanweisung Seite 18