HP 80st Betriebsanweisung PDF herunterladen (Seite 52)

4-4

Downloading Firmware

Checking and Downloading Firmware

Downloading Firmware

NOTE Ensure that the jukebox is not in LUN mode (logical unit numbering). Downloads

must be done with LUN mode off.

IMPORTANT If you are going to download firmware for the jukebox controller, the customer’s

default configurations should be recorded so that the jukebox can be correctly

restored. Go to the CONF * menu on the control panel to access and display the

current jukebox configurations.

1. Turn the jukebox off.

2. Ensure that your PC tool is off.

3. Remove any cable connections to the single-ended ports on the interface

module.

4. Connect a SCSI cable between your PC tool and one of the single-ended ports

on the interface module. (Connectors on the module are high-density.)

5. Turn the jukebox on.

Wait until the jukebox shows READY in the display.

6. Turn your PC tool on.

7. Follow your download utilities instructions to download the firmware needed

(jukebox and/or drives).

8. Go to Chapter 5, “Verifying Proper Jukebox Operation, Labeling, and

Cleanup.”

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58

Keine Kommentare

HP 80st Betriebsanweisung Seite 52