HP Wireless Bridge Bedienungsanleitung PDF herunterladen (Seite 16)

Chapter 5 DHCP Server

Dynamic Host Configuration Protocol (DHCP) is a TCP/IP standard for

simplifying management of host IP configuration. The DHCP standard provides for

the use of DHCP servers as a way to manage dynamic allocation of IP.

Every computer on a TCP/IP network must have a unique computer name and IP

address. The IP address (together with subnet mask) identifies both the host computer

and the subnet to which it is attached. When you move a computer to a different

subnet, the IP address must be changed. DHCP allows you to dynamically assign an

IP address to a client from a DHCP server IP address database on your local network

The settings of a TCP/IP environment of include host IP, Subnet Mask, Gateway,

and DNS configurations. For TCP/IP-based networks, DHCP reduces the complexity

and amount of administrator work involved in reconfiguring computers.

This product supports the function of DHCP server. If you enable this product’s

DHCP server and configure your computers as “automatic IP allocation” mode, then

when your computer is powered on, it will automatically load the proper TCP/IP

settings from this product. The settings of DHCP server include the following items:

1. DHCP Server: Check “Enable” to enable the DHCP server function. All the

settings in this page will take effect only if “Enable” is checked.

2. Range of IP Address Pool: Whenever there is a request, the DHCP server will

automatically allocate an unused IP address from the IP address pool to the

requesting computer. You must specify the starting and ending address of the

IP address pool.

Clients List List the current mapping of the IP and MAC address for

each DHCP client.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Keine Kommentare

HP Wireless Bridge Bedienungsanleitung Seite 16