HP ZBook 17 G3 Mobile Workstation (ENERGY STAR) Bedienungsanleitung PDF herunterladen (Seite 15)

NOTE: Before replacing or reimaging a hard drive, you must disable SRT.

NOTE: When replacing or reimaging a hard drive, you must clear the cache to prevent a data

conflict with information stored in cache memory. To clear the cache, from the Start screen, type

Intel, and then select Intel Rapid Storage Technology. Next, click the Acceleration link, select

Disable Acceleration, and then click the Reset to Available link to clear the cache.

Windows 7 steps:

1. Select Start > All Programs > Intel > Rapid Storage Technology.

2. Click the Accelerate icon and then click Select device.

3. Select the SSD size to be allocated for the cache memory.

NOTE: It is recommended to use the maximum size. Any remaining space on the SSD may be

used for data storage using the simple data single disk.

4. Select the hard drive (or RAID volume) to be accelerated.

NOTE: It is highly recommended to accelerate the system volume or system disk for maximum

performance.

5. Select the acceleration mode, and then click OK. The recommended setting is Maximized mode,

which is acceleration optimized for input/output performance.

The page refreshes and reports the new acceleration configuration in the Acceleration View.

NOTE: Before replacing or reimaging a hard drive, you must disable SRT.

NOTE: When replacing or reimaging a hard drive, you must clear the cache to prevent a data

conflict with information stored in cache memory. To clear the cache, select Start > All Programs

> Intel > Rapid Storage Technology. Next, click the Acceleration link, select Disable

Acceleration, and then click the Reset to Available link to clear the cache.

To configure SATA mode in Computer Setup (BIOS):

1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup

Menu” message is displayed at the bottom of the screen.

2. Press f10 to enter Computer Setup (BIOS).

3. Use a pointing device or the arrow keys to select System Configuration > Device Configurations.

4. In SATA Device Mode, change the value to RAID, press enter to accept, and then confirm the

change.

5. Use the arrow keys to select File > Save Changes and Exit, and then press enter.

For more information on Intel Smart Response Technology, see http://www.intel.com/support/

chipsets/sb/CS-032826.htm?wapkw=Smart%20Response%20Technology.

Intel Rapid Recover Technology

Intel Rapid Storage Technology supports the following recovery features.

Mirror update policies

With Recovery, you can determine how often the mirror hard drive is updated: continuously or on-

request. When using the continuous update policy, data on the primary drive is simultaneously copied

to the mirror drive as long as both drives are connected to the system. If you undock the computer

Intel Rapid Recover Technology 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Keine Kommentare

HP ZBook 17 G3 Mobile Workstation (ENERGY STAR) Bedienungsanleitung Seite 15