HP ProDesk 600 G3 Base Model Microtower PC Bedienungsanleitung PDF herunterladen (Seite 16)

Removing a slim optical drive bezel blank

On some models, there is a bezel blank covering the slim optical drive bay. Remove the bezel blank before

installing an optical drive. To remove the bezel blank:

1. Remove the computer access panel and front bezel. See Removing the computer access panel on page 7

and Removing the front bezel on page 9.

2. To remove the bezel blank, press to the side (1), swing out from the main bezel (2), and then remove the

blank from the bezel (3).

Replacing the front bezel

Insert the three hooks on the bottom edge of the bezel into the rectangular holes on the chassis (1), and then

rotate the top side of the bezel onto the chassis (2) and snap it into place.

10 Chapter 2 Hardware upgrades

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 48 49

Keine Kommentare

HP ProDesk 600 G3 Base Model Microtower PC Bedienungsanleitung Seite 16