15. Replace the computer access panel.
16. If the computer was on a stand, replace the stand.
17. Reconnect the power cord and any external devices, and then turn on the computer.
18. Lock any security devices that were disengaged when the access panel was removed.
19. Recongure the computer, if necessary.
Drive positions
Drive positions
1 3.5-inch secondary hard drive bay
2 3.5-inch primary hard drive bay
3 2.5-inch hard drive bay
4 9.5 mm slim optical drive bay
NOTE: The drive conguration on your computer may be dierent than the drive
conguration shown above.
Removing and installing drives
When installing drives, follow these guidelines:
● The primary Serial ATA (SATA) hard drive must be connected to the dark-blue primary SATA connector on
the system board labeled SATA0.
● Connect secondary hard drives and optical drives to one of the light-blue SATA connectors on the system
board labeled SATA1 and SATA2.
Drive positions 21
Kommentare zu diesen Handbüchern