Hp XP P9500 Storage Bedienungsanleitung PDF herunterladen (Seite 38)

5. Click Apply.

Changing external volume processor blade

Procedure 6 To change the processor blade

1. In Remote Web Console, click External Storages in the Storage Systems tree.

2. In the External Storages window, select the desired external storage system.

3. In the window for the selected external storage system, select a path group.

4. In the window for the selected path group, select the external volume whose processor blade

you want to change.

5. At the bottom of the window, click More Actions > Assign MP Blade.

6. In the Assign Processor Blade window, select the desired processor blade.

The current setting for the external volume displays, unless you have selected multiple external

volumes with different values. Then the field is blank.

The choices you see are dependent on the configuration of the device. They range from MPB0

to MPB7.

NOTE: Processor blade assignment should be set to evenly distribute work across all the

available processors.

Selecting Auto allows the system to assign the blade.

7. Click Finish.

8. In the Confirm window, check settings, accept or enter a new task name, and then click Apply.

Changing I/O system for external storage systems

With Load Balance Mode settings, you can change the I/O system for external storage systems

for each of the external volumes.

This section describes operations to change the Load Balance Mode of external volumes in the

Edit External Volumes window. For more information, see “Load Balance Mode” (page 22).

NOTE: To change the Load Balance Mode, the path mode of the external volume must be either

Multi or APLB.

To change the Load Balance Mode for each external volume:

1. Click External Storages in the Storage Systems.

The list of available external storage systems appears in the tree.

38 Monitoring and maintenance

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 121 122

Keine Kommentare

Hp XP P9500 Storage Bedienungsanleitung Seite 38