Hp EVA P6000 Storage Bedienungsanleitung PDF herunterladen (Seite 176)

Issue: Initiator cannot login to iSCSI or iSCSI/FCoE module target

Solution 1: Ensure the correct iSCSI port IP address is used

Solution 2: In HP P6000 Command View, for each iSCSI controller 01 and 02, click the IP ports

tab, then expand the TCP properties under the Advanced Settings. There should be available

connections; if not, choose another IP port to log in to or reduce the connections from other initiators

by logging out from unused connections (see Figure 89 (page 176)).

Figure 89 IP Ports tab

Issue: Initiator logs in to iSCSI or iSCSI/FCoE controller target but EVA assigned LUNs are not

appearing on the initiator

Solution 1. The initiator needs to log in to the target where the EVA LUN was assigned.

Solution 2. The EVA LUN was assigned to a different iSCSI Host then was expected.

Issue: EVA presented virtual disk is not seen by the initiator

Solution 1. The initiator has to login to the proper iSCSI target. Match the virtual disk presentation

properties as in Figure 90 (page 177) and Figure 91 (page 177) to the initiator’s target login.

176 Troubleshooting

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 315 316

Keine Kommentare

Hp EVA P6000 Storage Bedienungsanleitung Seite 176