Hp Brocade 16Gb SAN Switch for HP BladeSystem c-Class Bedienungsanleitung PDF herunterladen (Seite 33)

Weight and physical dimensions

Table 12 (page 33) lists physical properties.

Table 12 16Gb SAN Switch physical dimensions

MeasurementDimension

27.94 mm (1.1 in)Height

192.84 mm (7.59 in)Width

269.46 mm (10.6 in)Depth

1.49 kg (3.3 lb) without mediaWeight

Environmental requirements

To ensure proper operation, the switch must not be subjected to environmental conditions beyond

those for which it was tested. The ranges specified in Table 13 (page 33) list the acceptable

environment for both operating and nonoperating conditions.

Table 13 Environmental requirements

Acceptable range during non-operationAcceptable range during operationCondition

Non-operating -30° to 60°C (-22° to

140°F). Maximum rate of change is

20°C/Hr (36°F/Hr).

10° to 35°C (50° to 95°F) at sea level

with an altitude derating of 1.0°C per

every 305m (1.8°F per every 1000ft)

Ambient

temperature

above sea level to a maximum of 3050m

(10,000ft), no direct sustained sunlight.

Maximum rate of change is 10°C/Hr

(18°F/Hr ). The upper limit may be limited

by the type and number of options

installed. System performance may be

reduced if operating with a fan fault or

above 30°C (86°F).

5% to 95% relative humidity,

non-condensing

10% to 90% relative humidity,

non-condensing

Humidity

0 to 30,000 ft (9144 m) above sea

level

0 to 10,000 ft (3 km) above sea levelAltitude

140 G, 2ms40 G, 2ms durationShock

2.0 G, 5–500 Hz1 G, 10–500 HzVibration

Supported SFPs

Do not use unsupported SFPs. They may not fit correctly and may void your warranty. Any port

with an unsupported SFP will automatically be disabled by switch firmware, leaving the port

non-operational. See Supported SFP transceiver options (page 8) for a list of supported SFPs.

For a complete list of supported devices, see the latest version of the HP SAN Design Reference

Guide at the HP website:

http://h18000.www1.hp.com/products/storageworks/san/documentation.html.

Supported HBAs

For a list of HBAs that have been tested and are known to work with the SAN switches, see the

latest version of the HP SAN Design Reference Guide at the HP website:

http://h18000.www1.hp.com/products/storageworks/san/documentation.html.

Weight and physical dimensions 33

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40 41

Kommentare zu diesen Handbüchern

Keine Kommentare

Hp Brocade 16Gb SAN Switch for HP BladeSystem c-Class Bedienungsanleitung Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Lager Hp Brocade 16Gb SAN Switch for HP BladeSystem c-Class