HP 3PAR Installationshandbuch PDF herunterladen

HP 3PAR StoreServ File

Controller Quick Start Guide

IMPORTANT: Read this document first.

Microsoft® and Windows® are U.S. registered trademarks of Microsoft

Corporation.

*C8S69-96001*

HP Part Number: C8S69-96001

Published: June 2013

Edition: 2

Supported storage systems

These installation instructions apply to the HP 3PAR

StoreServ File Controller, which is based on the HP

ProLiant DL380p Gen8 server platform.

For details and specifications, see the HP 3PAR StoreServ

File Controller QuickSpecs available at:

http://www.hp.com/go/3PARStoreServ

For general information about HP ProLiant Gen8 servers,

go to:

http://www.hp.com/go/proliantgen8/docs

IMPORTANT: Included with your storage system

is the HP Storage System Recovery DVD. This DVD

is used to restore the system to factory defaults.

Keep this DVD in a safe place.

The Microsoft Windows Storage Server 2012 Standard

Edition operating system is preinstalled and activated

on all systems.

Record network information

It is critical to have the correct networking information

available before proceeding with the system installation

and configuration. It may be necessary to pre-stage DNS

information. Contact your system administrator to clarify

network configuration requirements.

IMPORTANT: Before joining the 3PAR StoreServ

system nodes to the Active Directory domain,

ensure that there is network connectivity between

each node and the domain controller.

The HP 3PAR StoreServ File Controller requires a

minimum of 6 IP addresses. These addresses may be

statically assigned or assigned by a DHCP server or

both. If you are using static addressing or a DHCP server

that does not automatically update DNS, ensure that

both forward and reverse DNS information (A and PTR

records) is pre-staged in the DNS server.

Use Table 1 (page 1) or Table 2 (page 1), depending

on your system configuration, to document your network

information before proceeding with system setup.

Table 1 Network information (clustered system)

IP address

Fully qualified DNS

name (FQDN)Network device

Node 1 iLO

Node 2 iLO

Node 1

Table 1 Network information (clustered system)

(continued)

IP address

Fully qualified DNS

name (FQDN)Network device

Node 2

Cluster

First file server

Table 2 Network information (standalone system)

IP address

Fully qualified DNS

name (FQDN)Network device

System

iLO

Restrictive Active Directory environments

If the 3PAR StoreServ system is placed in a restrictive

Active Directory environment, it may require pre-staging

Active Directory objects or certain administrative

permissions. See the following Microsoft articles for more

information:

• How to Create a Cluster in a Restrictive Active

Directory environment

• Failover Cluster Step-by-Step Guide: Configuring

Accounts in Active Directory

Validate network information

Confirm that the IP address and names are not already

in use.

Complete the tests in Table 3 (page 1) or Table 4 (page

1), depending on your configuration, to verify network

connectivity. Consult with your network administrator to

confirm test results.

Table 3 Validation tests (clustered system)

Successful?

(Y/N)Command(s) to executeTest

ping <node 2 address>Ping the IP address

of Node 2 from

Node 1.

ping <node 2 name>

ping <node 2 fqdn>

Ping the name of

Node 2 from Node

ping <node 1>Ping the IP address

of Node 1 from

Node 2.

ping <node1 name>

ping <node1 fqdn>

Ping the name of

Node 1 from Node

Table 3 Validation tests (clustered system) (continued)

Successful?

(Y/N)Command(s) to executeTest

nslookup <node 1

address>

nslookup <node 1 name>

Verify forward and

reverse DNS

information for

Node 1 is correct.

nslookup <node 1 fqdn>

nslookup <node 2

address>

nslookup <node 2 name>

Verify forward and

reverse DNS

information for

Node 2 is correct.

nslookup <node 2 fqdn>

ping <domain controller

address>

ping <domain controller

name>

Ping the domain

controller from

Node 1.

ping <domain controller

fqdn>

ping <domain controller

address>

ping <domain controller

name>

Ping the domain

controller from

Node 2.

ping <domain controller

fqdn>

pingpath <domain

controller address>

pingpath <domain

controller name>

Verify the network

path to the domain

controller and DNS

servers is correct.

pingpath <DNS server

address> (repeat for each DNS

server)

pingpath <DNS server

name> (repeat for each DNS

server)

Table 4 Validation tests (standalone system)

Successful?

(Y/N)Command(s) to executeTest

ping <system address>Ping the IP address

of the StoreEasy

system from

another system on

the same network.

ping <system address>Ping the IP address

of some other

system on the same

network form the

StoreEasy system.

ping <node1 name>

ping <node1 fqdn>

Ping the name of

the StoreEasy

system from

another system on

the same network.

Page 1

1 2

Inhaltsverzeichnis

Seite 1 - Controller Quick Start Guide

Seite 2 - Documentation feedback

Table 4 Validation tests (standalone system) (continued)Successful?(Y/N)Command(s) to executeTestping <node1 name>ping <node1 fqdn>Ping th

Weitere Dokumente für Server HP 3PAR

Um das Dokument anzuzeigen HP 3PAR Bedienungsanleitung

HP 3PAR Bedienungsanleitung (51 Seiten)

Um das Dokument anzuzeigen HP 3PAR Betriebsanweisung

HP 3PAR Betriebsanweisung (144 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

HP 3PAR Installationshandbuch

Stöbern Sie online oder laden Sie Installationshandbuch nach Server HP 3PAR herunter. HP 3PAR Setup and Install Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Server HP 3PAR

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Server HP 3PAR