HP ProDesk 400 G4 Small Form Factor PC Bedienungsanleitung PDF herunterladen (Seite 15)

Removing the front bezel

1. Remove/disengage any security devices that prohibit opening the computer.

2. Remove all removable media, such as compact discs or USB ash drives, from the computer.

3. Turn o the computer properly through the operating system, then turn o any external devices.

4. Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as

the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to

the internal components of the computer.

5. Remove the computer access panel. See Removing the computer access panel on page 5.

6. Lift up the four tabs on the top side of the bezel (1), and then rotate the bezel o the chassis (2).

NOTE: You may need a tool to pry up the three bezel tabs, or you can remove the hard drive cage to

make the tabs easier to access.

Removing the front bezel 7

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 52 53

Keine Kommentare

HP ProDesk 400 G4 Small Form Factor PC Bedienungsanleitung Seite 15